HRK Posted August 7, 2019 Report Share Posted August 7, 2019 Hi, I'm using CAN LAMBDA,but the included sensor is broken. I got another BOSH genuine LSU4.9 sensor. Do I need to connect to CAN LAMBDA to make any settings? I'm afraid that the calibration value will differ depending on the sensor. Thank you in advance. Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted August 7, 2019 Report Share Posted August 7, 2019 The calibration for the 4.9 is laser trimmed into each sensor, no need for any calibration HTH, Richard. Quote Link to comment Share on other sites More sharing options...
HRK Posted August 7, 2019 Author Report Share Posted August 7, 2019 Richard, thank you for your answerNo need to enter the laser trimmed number in LINK? Thank you in advance Quote Link to comment Share on other sites More sharing options...
Richard Hill Posted August 7, 2019 Report Share Posted August 7, 2019 No, it's built into the connector and measured by the wideband controller on the 6th wire. Quote Link to comment Share on other sites More sharing options...
HRK Posted August 7, 2019 Author Report Share Posted August 7, 2019 Thank you very much My afraid is gone Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.