Jump to content

link g4 atom 4age 20v no trigger signal


Waiee Emaran

Recommended Posts

hey guys! i just finish wiring link atom 2 on this 4age 20v. now im having a problem with the trigger signal, theres no signal on trigger when cranking the engine. Trigger 1 is on NE, Trigger 2 is G2 and ecu gnd is on GND. 

IMG_20190701_222720.JPG

this is the trigger setup on my laptop, 

IMG_20190807_164847.jpg

Trigger Mode, Multi-Tooth

Trigger Priority, Trig 1

 

Trigger 1 type Reluctor, level 1, Cam, 24tooth

Trigger 2 type reluctor, level 1, sync mode Cam pulse 1x

Link to comment
Share on other sites

If you open the runtimes screen and go to triggers/limits, when cranking does the trig 1 & 2 signal turn green and say yes?

If not try pulling the dizzy out and spinning it by hand or with a cordless drill.  If you dont get any trigger signal then, it suggests you have a wiring problem.

MkxLzXi.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...