Kev Sheridan Posted August 8, 2019 Report Share Posted August 8, 2019 Hi, im trying to set up anti lag on an audi tt 1.8t but the ignition retard table was set to ect and idle error, so I changed axis to engine speed and tp main but can't enter a value above 0 in the table. can anbody tell me how I can adjust the maximum allowed value in the table please. Any advice much appreciated thank you Quote Link to comment Share on other sites More sharing options...
Rossobianconero Posted August 8, 2019 Report Share Posted August 8, 2019 3 hours ago, Kev Sheridan said: Hi, im trying to set up anti lag on an audi tt 1.8t but the ignition retard table was set to ect and idle error, so I changed axis to engine speed and tp main but can't enter a value above 0 in the table. can anbody tell me how I can adjust the maximum allowed value in the table please. Any advice much appreciated thank you I will suggest to read the help section about antilag, but that table is in degrees that you are gonna take out of the ing table, so is all in negative numbers, thats why the software dont allows positive numbers on that table. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.