Jump to content
saescort

Mk2 Escort with Duratec (Zetec ) ST170 / SVT not starting

Recommended Posts

Hi All

 

Hope you clever people can help. 

This is my first time setting up vipec

 

I can not get this motor to run. Tried for days now!!!!

 

Spec as follow

ECU - Vipec V88

Motor - Ford Duratec / ST170 / SVT with the VCT on the inlet cam with Turbo

Ignition - Beru ZS041 coil on plugs. All info I have on them. ECU Mode is direct spark. Done tests, they click

Injectors - Deatschwerks Bosch injectors. Dead times as per spec given. ECU Mode is Sequential. Done tests, they click

 

Triggers - Brand new reluctor Ford sensors. Checked wires for wrong way around. 100% confident they are correct.

On trigger setup up I selected the Duratec VCT setup. Get steady rpm on cranking.  Trigger 1 and 2 both get signal as they go Yes.

Trigger 2 picks up 90% of the time, even when checking under vvt in runtime values. Sometimes it says  "error: 2nd cam pulse" on trigger 2. Comes and goes.

The cam has 5 teeth. 4 equal with one in between them. Almost like 8 - 3 teeth. 

Calibrated trigger. Get perfect reading on TDC. Sometimes the cam is in exhaust stroke and sometimes in compression stroke???

 

Dont know what to do, please help. Attached is the map file

 

 

 

 

 

ASetup090819.pcl

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...