Jump to content
turbodailydan

Rb26 Ross trigger setup (2019 new version)

Recommended Posts

Hey guys

 

so I'm currently running an early Ross trigger kit on my rb26 and have one of their new kits coming which is a better design as per the pic. 

 

The early kit has 12 pointed teeth on the crank, the new one has square edged teeth, and the old cam trigger had an indent, where as the new one has a tooth. Using gt101 sensors. 

Just looking for for what settings I should use on this, ie rising edge or falling edge on crank/cam? 

Cheers dan

 

image.jpg

Share this post


Link to post
Share on other sites

Thanks Adam, reason I ask is I'm sure I read somewhere that the g101 sensors were more accurate when set to rising edge on the crank and falling on the cam or vice versa. So just wanted to confirm. 

Share this post


Link to post
Share on other sites

The fall time is about 5x faster than the rise time.  This means the falling edge is the most accurate.  Still spliting hairs tho, even 5uS is 5/8ths of F all.

Having said that, the GT101 has been obsolete for several years now so I would be surprised if that is what they are supplying.  More likely one of the Littlefuse or ZF replacements.

ZuNezbG.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...