Jump to content
ray1395

Bank's power iDash 1.8

Recommended Posts

Hi,

I have recently bought a Bank's power iDash 1.8 to run in my gc8, which has Link g4+ plug in ecu.

The manual they sent does not have information about how to setup in the link software.

Anyone knows how to configure it? I also have a link Can lambda at channel 1, not sure if this makes any differences.

Appreciate any guidance. 

Thanks,

Ray

Share this post


Link to post
Share on other sites

i chose the Link G4+ ECU option when purchase, so it comes with CAN H and L wires, white and green.

I have connected to CAN1, but cannot find any can device when search for it.

The following is wiring instruction from Banks: what is comms 3 and 4?

0?ui=2&ik=9fb714d80b&attid=0.1&permmsgid=msg-f:1643338157745690184&th=16ce4f590246d648&view=fimg&sz=s0-l75-ft&attbid=ANGjdJ9ohWXeRtiW7Q8joRWH2gUc1vUB04xQxe8cFKf6QB9qX9EdLZB0u3QAwUUIMAu6b1Hsk2BqPwEnsZBMqeYygRHWOgiX2xL8_3upt43bMw2xTqHXSaWGnJNoOo4&disp=emb

Share this post


Link to post
Share on other sites
I use a perfect tuning universal gauge connected to CAN

In that case, CAN Setup is as follows.
CAN Configuration
CAN 2
Mode: User Defined
Bit Rate: 1Mbit / s

 
Data
Mode: Transmit Generic Dash
Transmit Rate: 20Hz
CAN ID: 1000
Format: Normal

Bit rate, transmit rate and CAN ID must match the meter and settings

The settings may not match because the meter is different

I hope to succeed
 

Share this post


Link to post
Share on other sites

Their manual says "If you are using the iDash 1.8 with an aftermarket ECU, reference iDash 1.8 aftermarket ECU setup, Owners Manual 97670 for more details", I can not find that manual on their website so you may want to ask them.

If I were to hazard a guess, I would say they most likely expect the Link to be set to transmit generic dash on ID 1000 as most other 3rd party devices do.  

Share this post


Link to post
Share on other sites
17 minutes ago, Adamw said:

If I were to hazard a guess, I would say they most likely expect the Link to be set to transmit generic dash on ID 1000 as most other 3rd party devices do.  

Ray forwarded me an email from Banks, this is the case, Generic Dash, ID 1000, 20 Hz, 1 Mbit/s
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...