Bennis Posted September 5, 2019 Report Share Posted September 5, 2019 Hi just about to do the r35 coil conversion kit including the new loom to delete the factory iginitor on my 26 has a r32 loom, I just would like some help on when I go into my link PC what do I change to make these work, tia cheers Quote Link to comment Share on other sites More sharing options...
0x33 Posted September 5, 2019 Report Share Posted September 5, 2019 R32 GTR uses direct spark settings with a Link ECU from the factory. This will not change when you run the new R35 coils. Once you are plugged in with the new coils, I would go to ignition test and ping each of the coils to check that they are assigned/wired correctly. Once happy they are assigned correctly, you will need to enter in the dwell settings for those coils. I don't know the data for this off the top of my head, but maybe it was supplied with your conversion kit. If not I'm sure the data is out there on the interwebs somewhere. Finally I would get the timing light out, go to calibrate and re-adjust your ignition delay as I would hope you would need less delay now with more modern/simple ignition components. Gsab 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.