Jump to content
Bennis

R35 gtr coil conversion r32 rb26

Recommended Posts

Hi just about to do the r35 coil conversion kit including the new loom to delete the factory iginitor on my 26 has a r32 loom, I just would like some help on when I go into my link PC what do I change to make these work, tia cheers

Share this post


Link to post
Share on other sites

R32 GTR uses direct spark settings with a Link ECU from the factory. This will not change when you run the new R35 coils. 

Once you are plugged in with the new coils, I would go to ignition test and ping each of the coils to check that they are assigned/wired correctly. 

Once happy they are assigned correctly, you will need to enter in the dwell settings for those coils. I don't know the data for this off the top of my head, but maybe it was supplied with your conversion kit. If not I'm sure the data is out there on the interwebs somewhere. 

Finally I would get the timing light out, go to calibrate and re-adjust your ignition delay as I would hope you would need less delay now with more modern/simple ignition components. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...