Jump to content
driftma

1jzvvti base setup?

Recommended Posts

Hello,

Seeing as it looking like Link ECU japan now has a PNP version of the JZX100 ECU available does that mean that there will be a base setup available in the base maps folder some time soon?

Share this post


Link to post
Share on other sites

Once we have released it globally there will be in the next PC link release.

Japan are doing the testing for us.

Share this post


Link to post
Share on other sites
22 hours ago, Adamw said:

There is one of my 1JZ base maps in this thread:  

 

 

Hi Adamw,

Would this map be suitable for a JZX100 running on a link kurofune G4+? My wiring guy is currently looking for a base file just to cut down some time.

Thank you

Share this post


Link to post
Share on other sites
44 minutes ago, louis19 said:

 

Hi Adamw,

Would this map be suitable for a JZX100 running on a link kurofune G4+? My wiring guy is currently looking for a base file just to cut down some time.

Thank you

Yes.  Load it into your (live) kurofune and all the Kurofune features will be assigned.  You will then need to re-assign any inputs and outputs that dont match your wiring and if you are using an HKS adapter loom you will need to change the firing order to 123456.  

Share this post


Link to post
Share on other sites
50 minutes ago, Adamw said:

Yes.  Load it into your (live) kurofune and all the Kurofune features will be assigned.  You will then need to re-assign any inputs and outputs that dont match your wiring and if you are using an HKS adapter loom you will need to change the firing order to 123456.  

Thanks for the quick response mate! :D

Would you be able to point us in the best location for wiring in the MAP sensor and flex fuel sensor? Is there any preference here? Can we wire into some of the unused factory plugs that run back to the ecu for signal wires like the MAF sensor which will now be replaced by the MAP sensor etc. 

Share this post


Link to post
Share on other sites

MAF is normally connected to pins 21 or 9 in the HKS looms.  Some of their looms have a seperate MAP plug already there but Im not sure about the JZX loom.  There is unlikely an existing unused wire for the flex sensor, you can connect that to any DI from 1-8.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...