Vinkelkapen Posted September 20, 2019 Report Share Posted September 20, 2019 hi, been tuning these ECUs for a while and have a wish for improved log analysis instead of "time plot - parameters" where i select what parameters i want to view in the graph i would want a type of "parameter list" where i can add all parameters i want and then checkboxes besides them, to easily check or uncheck them right beside the graph in the layout view.. this would make it easier when seeing a problem and not knowing what it is to go through a lot of parameters one by one faster or even when you just want to check with high resolution and maybe only two parameters at a time, i know it is possible to add your own layout fields but this would be a improvement in how i working with logs. also the resolution is kind of hard to work around, i havent found a function for it.. so a button to change the min/max values in the field that is zoomed in woud be handy.. if for example viewing a parameter with high numbers but also small numbers that also have a big impact in some performance, when looking at these small numbers in zoomed in state the small numbers makes less sense in the graph due to too big min max values in zoomed in state, and if i want to see them in higher resoulution i again need to go to "time plot - parameters" and change the min max values i attached pic from a program i work in alot so my rambeling makes a little more sense Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 20, 2019 Report Share Posted September 20, 2019 As for your "resolution" request, it sounds like you are talking about vertical zoom? ALT+UP/DOWN will zoom your vertical axis. Quote Link to comment Share on other sites More sharing options...
Vinkelkapen Posted September 20, 2019 Author Report Share Posted September 20, 2019 Ah! excellent must have missed that shortcut or not really thinked about it, it kind of zooms in an odd way though but it really helps to have that shortcut Quote Link to comment Share on other sites More sharing options...
cj.surr Posted September 30, 2019 Report Share Posted September 30, 2019 Coming from other tuning softwares, this also bothered me at first. But now I just have different layout pages with time plots and different groups of parameters. I've found this is more organized and I like it better. Just a suggestion. Quote Link to comment Share on other sites More sharing options...
Vinkelkapen Posted October 1, 2019 Author Report Share Posted October 1, 2019 Yeah that's what I'm doing now, but sometimes I want to add some parameters or take away just for a fast check in the layout I'm using. The platform I'm using is not for tuning but for oem analysis/repair etc The vertical zoom i find kind of odd using, when zooming its zooming for what seams to be middle value of max and min and not what's displayed on screen, so when viewing low number and zoom vertically they disappear if zoomed to mutch... Is this something I can solve without going in and out of time plot parameters? Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 1, 2019 Report Share Posted October 1, 2019 29 minutes ago, Vinkelkapen said: The vertical zoom i find kind of odd using, when zooming its zooming for what seams to be middle value of max and min and not what's displayed on screen, so when viewing low number and zoom vertically they disappear if zoomed to mutch... Is this something I can solve without going in and out of time plot parameters? Yes, turn the Y axis scroll bar option on or use the shift+up, shift+down short cut. Quote Link to comment Share on other sites More sharing options...
mapper Posted October 3, 2019 Report Share Posted October 3, 2019 I like to add another point. I'm really missing a delta function where you have two cursors to see the difference between two points. Once GPS mapping is possible a distance mode for the X-axis will be needed, too. Vinkelkapen and Rozsko 2 Quote Link to comment Share on other sites More sharing options...
Stevieturbo Posted December 24, 2019 Report Share Posted December 24, 2019 If the files could be saved as a .csv, or exported as such then they could be used with other better/more universal software out there. Quote Link to comment Share on other sites More sharing options...
Davidv Posted December 25, 2019 Report Share Posted December 25, 2019 9 hours ago, Stevieturbo said: If the files could be saved as a .csv, or exported as such then they could be used with other better/more universal software out there. You can do this already Quote Link to comment Share on other sites More sharing options...
Stevieturbo Posted December 25, 2019 Report Share Posted December 25, 2019 There ya go then, all sorted lol. Quote Link to comment Share on other sites More sharing options...
Bebelracing Posted March 10, 2020 Report Share Posted March 10, 2020 would it be possible soon to overlay 2 log file? then we can compare stuffs like accéleration, dyno pull, lap etc.….. Quote Link to comment Share on other sites More sharing options...
Davidv Posted March 10, 2020 Report Share Posted March 10, 2020 You can already do that too. You just open the log file manager tab on the side, and then click in the box for the one you'd like to overlay. Then it shows two lots of graph times down the bottom, you can move one back and forth if you want to try make them line up. Adamw 1 Quote Link to comment Share on other sites More sharing options...
TechDave Posted March 11, 2020 Report Share Posted March 11, 2020 You can keep adding overlays too, you can click and drag the 2nd time stamp on the time plot to slide the overlay back and forth. If you click on the time stamp in the log file manager, that log can then be adjusted on the time plot too. Quote Link to comment Share on other sites More sharing options...
Rozsko Posted September 22, 2021 Report Share Posted September 22, 2021 On 10/3/2019 at 1:43 PM, mapper said: I like to add another point. I'm really missing a delta function where you have two cursors to see the difference between two points. Once GPS mapping is possible a distance mode for the X-axis will be needed, too. +1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.