Jump to content
Vinkelkapen

Log analysis improvement

Recommended Posts

hi, been tuning these ECUs for a while and have a wish for improved log analysis 

instead of "time plot - parameters" where i select what parameters i want to view in the graph i would want a type of "parameter list" where i can add all parameters i want and then checkboxes besides them, to easily check or uncheck them right beside the graph in the layout view..

this would make it easier when seeing a problem and not knowing what it is to go through a lot of parameters one by one faster or even when you just want to check with high resolution and maybe only two parameters at a time, i know it is possible to add your own layout fields but this would be a improvement in how i working with logs.

 

also the resolution is kind of hard to work around, i havent found a function for it..

so a button to change the min/max values in the field that is zoomed in woud be handy.. if for example viewing a parameter with high numbers but also small numbers that also have a big impact in some performance, when looking at these small numbers in zoomed in state the small numbers makes less sense in the graph due to too big min max values in zoomed in state, and if i want to see them in higher resoulution i again need to go to "time plot - parameters" and change the min max values

 

i attached pic from a program i work in alot so my rambeling makes a little more sense

 

 

view 1.png

view 2.png

Share this post


Link to post
Share on other sites

Coming from other tuning softwares, this also bothered me at first. But now I just have different layout pages with time plots and different groups of parameters. I've found this is more organized and I like it better. Just a suggestion.

Share this post


Link to post
Share on other sites

Yeah that's what I'm doing now, but sometimes I want to add some parameters or take away just for a fast check in the layout I'm using. 

The platform I'm using is not for tuning but for oem analysis/repair etc 

The vertical zoom i find kind of odd using, when zooming its zooming for what seams to be middle value of max and min and not what's displayed on screen, so when viewing low number and zoom vertically they disappear if zoomed to mutch... Is this something I can solve without going in and out of time plot parameters? 

Share this post


Link to post
Share on other sites
29 minutes ago, Vinkelkapen said:

The vertical zoom i find kind of odd using, when zooming its zooming for what seams to be middle value of max and min and not what's displayed on screen, so when viewing low number and zoom vertically they disappear if zoomed to mutch... Is this something I can solve without going in and out of time plot parameters? 

Yes, turn the Y axis scroll bar option on or use the shift+up, shift+down short cut. 

Share this post


Link to post
Share on other sites

I like to add another point. I'm really missing a delta function where you have two cursors to see the difference between two points.

Once GPS mapping is possible a distance mode for the X-axis will be needed, too. 

Share this post


Link to post
Share on other sites
9 hours ago, Stevieturbo said:

If the files could be saved as a .csv, or exported as such then they could be used with other better/more universal software out there.

 

You can do this already :)

Share this post


Link to post
Share on other sites

You can already do that too. 

You just open the log file manager tab on the side, and then click in the box for the one you'd like to overlay. 

Then it shows two lots of graph times down the bottom, you can move one back and forth if you want to try make them line up.

Share this post


Link to post
Share on other sites

You can keep adding overlays too, you can click and drag the 2nd time stamp on the time plot to slide the overlay back and forth.

If you click on the time stamp in the log file manager, that log can then be adjusted on the time plot too.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...