Jump to content

Honda k24a3 monsoon startup tune


K24turbo4x4

Recommended Posts

Heres one from a k20z4 as a close starting point. You will have to change engine size up to 2400, injector size & dead times to whatever you are using (this car used evo10 injectors), and trigger1 mode from K20 to K24. You may also need to change trigger 1 edge from rising to falling. If you dont have a fuel pressure sensor (factory ones dont), then you will need to change the MAP reference in injector config away from FP sensor as well.

Also the input & outputs will likely be wrong for your car. depends how much work you've done already if you start from this or just compare it to yours and change things that dont match.

k20z4-27.1-550-ve-567.pclr

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...