Stillrolla Posted September 30, 2019 Report Share Posted September 30, 2019 I know this is mostly a daily driver request and not a main focus. A A/c Idle target RPM would be nice to have when closed loop is turned on. as of now open loop works fine but letting the ecu do the work would be a super nice add on. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 30, 2019 Report Share Posted September 30, 2019 You can already do this. In the CL idle speed control settings you can set the Base/Target table Mode to 3D. You will then get a new "Target RPM trim table". Put AC Clutch Aux out on one axis (1 means off, 2 means on). Then you can add say 100RPM to your closed loop target when AC is on. Stillrolla 1 Quote Link to comment Share on other sites More sharing options...
Stillrolla Posted September 30, 2019 Author Report Share Posted September 30, 2019 OK i figured that was another option, This is how it is currently. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.