Jump to content
thetyrant

Powering G4+ Storm off the car to pull map

Recommended Posts

I have a G4+ Storm to go in my MR2 Spyder turbo build, im not quite ready to fit the turbo kit and ecu (which is hard wired into factory engine loom that came with kit off car kit was previously fitted onto)  but i would like to pull the map off ecu now if possible to go over what has been done previously,  is it as simple as connecting it to a 12v power supply and ground to enable me to do this ?

 

 

Share this post


Link to post
Share on other sites

Yes it is. Check the pinout in the help file then connect 12v, ground, and the programming cable and you are good to go

Share this post


Link to post
Share on other sites
57 minutes ago, Richard Hill said:

Pin 5 on the a plug to 12 Volts, and pin 25 or 34 on the a plug to ground (only need one ground to bench power) 

HTH, 

 Richard. 

 

Thanks Richard that confirms what ive just been working out from the help file, always good to have it confirmed before plugging in!

 

Ian

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...