Greg W Posted October 20, 2019 Report Share Posted October 20, 2019 Another dash setup help needed guys, can i hear the groans from here Fury with AIM MXL pro 5 on connector B CAN2 Aim has Link G4 config Gone over the other dash and can related threads and used the generic dash config, may have the transmit rate too low at 1 hz (just looking to the latest post below) pics of the AIM and fury screens , welcome suggestions Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 20, 2019 Report Share Posted October 20, 2019 The dash set up looks wrong to me, those "G4" channel names look like they are from the RS232 stream. The ECU type should be set to something like "CAN_BUS_BASE_LCC". There are set up instructions with pictures for the MXL in the help file. Go to: G4+ ECU Tuning Functions > CAN > Device Specific CAN Information>AIM MXL Pista. Also, the transmit rate in the ECU should be set to 20Hz. Quote Link to comment Share on other sites More sharing options...
Greg W Posted October 20, 2019 Author Report Share Posted October 20, 2019 Thanks Adam Looked all through the forum and neglected the help file Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.