JakeRX4 Posted October 22, 2019 Report Share Posted October 22, 2019 Ill paint a picture, I have a 13B turbo running on a Storm, fully tuned, runs great. For the purpose of making a spectacle at track day cruise sessions, I want to activate the secondary fuel and ignition tables on one digital input, basically, normal everyday tune when the DI is off, then 'look at me' flamethrower tune on decel when DI is on. Would there be any issues activating both tables on the same DI is what I want to know. The reason for doing both obviously is to be able to add fuel in the low load decel areas of the map and also pull some timing out in the same areas. I realise it childish hard on gear etc but any constructive input is appreciated. Thanks team. Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 22, 2019 Report Share Posted October 22, 2019 No problem to do this. Set up your DI as a GP Input. Set either both 4D tables or the "Dual fuel/Dual ign" tables to be activated by that same DI. Quote Link to comment Share on other sites More sharing options...
JakeRX4 Posted October 22, 2019 Author Report Share Posted October 22, 2019 Thanks Adam, thought as much, just wanted to confirm before getting stuck in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.