Jump to content
duncan351

OBD II Android is a Joke! Seriously??

Recommended Posts

The Pids that are actually functional through Link ECU are rather close to worthless. The only useful ones are Water temp, Oil Temp (I guess) Boost, and a few others however No actual AFR's (Instead its AFR command which is pointless) I don't have oil pressure, I would like to monitor other of my Analog inputs and many other important information. I see that the Torque App could pull in other Pids and even customize data to display in its app but Link doesn't have it available unless there is a way to assign specific parameters to different ODB Pids to display.
For such a Great system user need a much better display option of gauges beside keeping a laptop hooked up or changing my Dash to accept a Tablet. Is there anything else in the works? Are there any better options than this lousy OBD II please?

Share this post


Link to post
Share on other sites

I just saw your post of realdash which looks a lot more more promising as it isn't limited to OBD II protocol if my understanding is correct. But it looks like I need to use my tuner cable to see all the data. I can't use the obd II port with my wfi adapter to communicate  with the Fury ECU and get all the parameters real dash is capable of displaying or do both apps basically display the same thing and I'm spinning my wheels?

 

Share this post


Link to post
Share on other sites

Yes realdash needs to connect via USB.  Lambda wont work on realdash with the Fury as the serial comms it uses is quite out of date so doesnt have Internal lambda or CAN Lambda in its message.

Share this post


Link to post
Share on other sites
On 11/10/2019 at 5:39 AM, duncan351 said:

For such a Great system user need a much better display option of gauges beside keeping a laptop hooked up or changing my Dash to accept a Tablet. Is there anything else in the works? Are there any better options than this lousy OBD II please?

We have a really nice colour display:
http://dealers.linkecu.com/MXS_street

Completely customisable, you can display any parameter inside the ecu over CAN Bus.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...