Jump to content
tiago

Subaru Sti V6 intake manifold swap to V7 and Direct Spark

Recommended Posts

Hey guys, I decided to swap my intake manifold from a sti V6 to a V7 to get ride of the ISC stepper and also I removed the coil pack to use Direct Spark.

What would be the best approach to wire the coils?
Use the loom Ignition Drive 7 and 8 + the current Ignition Drive 1 and 2.
Or
Could I use Aux 7 and 8 for the coil since I'm not going to use it anymore?
Or better rewire the Engine Fan to use Ignition Drive 1, 2, 3 and 4 on the coils and move Aux 7 and 8 for the fans?

Any other tip or advice on that?

 

Subaru Link Ecu.PNG

Share this post


Link to post
Share on other sites
26 minutes ago, Simon said:

You have to use ign 1-4 for the coils if going individual 

Move the engine fans over to the freed up Aux 5-8 drives 

 

Do I need to wire ign 1-4 to the respective cylinders?
Like:
ign 1 to cylinder #1
Ign 2 to cylinder #2
Ign 2 to cylinder #3
Ign 2 to cylinder #4
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...