replica-rs4 Posted December 6, 2019 Report Share Posted December 6, 2019 Hi, what is torque managment used for and is it normal for it to revert to off position after power has been cycled to ecu? Thank you Quote Link to comment Share on other sites More sharing options...
Simon Posted December 6, 2019 Report Share Posted December 6, 2019 Torque Management Torque Management is used to reduce the amount of torque produced by the engine. It does this by retarding the ignition timing to reduce engine torque to the requested level. NOTE: Currently this function is only used by certain Link plug in ECUs and has no application outside of these ECUs. For transmission gear shifting control, when the Transmission Control Module (TCM) wants to shift gears it requests the Engine Control Unit (ECU) to reduce engine torque. This is to ensure smooth shifting and prevent transmission damage. The following Torque Management settings are only used on specific Link plug-in ECUs Quote Link to comment Share on other sites More sharing options...
replica-rs4 Posted December 6, 2019 Author Report Share Posted December 6, 2019 Is audi tt plug in one of those ecus? Any of this used for torque value in CAN stream for abs ? Thank you Quote Link to comment Share on other sites More sharing options...
Simon Posted December 6, 2019 Report Share Posted December 6, 2019 No only application is the 350Z can stream, and need to be running modeled fuel mode. Quote Link to comment Share on other sites More sharing options...
mapper Posted December 6, 2019 Report Share Posted December 6, 2019 Hi Simon Why not unlock the function for use with all ECU's? A torque ctrl function will be good for WOT and partload. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.