Nickerz Posted December 11, 2019 Report Share Posted December 11, 2019 Does anyone have a completely stock tune? I'm getting the runaround here from shops that want blank checks to tune a car I'm interested in purchasing but really, I'm only interested in running it stock. Beams Swapped IS300 with G4+ standalone on a base map with no power mods. I don't know anything about tuning so I really have no business tuning this car. I would definitely not mind going from a base tune back to stock eventually once I get a feel for it, but this car has passed through two people's hands so far that never tuned it. I don't want to be the third to buy this car, fail and then look for the next victim. There aren't any links shops out here with any experience. A secondary recommendation would be any famous Altezza Links tuners that I could email for a mail order tune. Thanks! Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted December 16, 2019 Report Share Posted December 16, 2019 Im not famous in the slightest but have a good bit of experience with the link platform and the 3sge beams that i run in my own personal car. Where are you located? And there is a base calibration in the software pack which should get a stock engine up and running with minimal effort. Quote Link to comment Share on other sites More sharing options...
3sgeks Posted September 30, 2022 Report Share Posted September 30, 2022 Hi everyone I was wondering the same thing. I would like just a base tune so that i could drive this thing. Also, are there any remote tuners out there? I'm located In Kansas. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 30, 2022 Report Share Posted September 30, 2022 Our altezza base map should run a stock engine pretty well, just change the injector size to match what you have. The base map came from a turbo'd beams but it was low boost, stock apart from larger injectors. Quote Link to comment Share on other sites More sharing options...
kuberacing Posted February 1 Report Share Posted February 1 Hi everyone, Have you the stock first file of G4+ Altezza? I search it for start a project with my used G4+ Altezza ECU. Thanks in advance, Best regards. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.