augusto Posted December 17, 2019 Report Share Posted December 17, 2019 Aux 4 pin 55 connector C-119 In serial ecu 46119 v.15 auxiliary output 4, which should change the speed of the electric fuel pump does not work. This information does not exist in the manual Mitsubishi EVO IX. I lost a few hours of service until I found out that it didn't work. This information if present in the manual. Augusto. Quote Link to comment Share on other sites More sharing options...
Simon Posted December 17, 2019 Report Share Posted December 17, 2019 Hi Augusto You will have a later E throttle equipped board and the pinout changed. You need to reference in the PC link help file G4+ Plug-In ECU Installation Manual > Pinouts > EVOLink (IX) with EThrottle and G4+ Plug-In ECU Installation Manual > Pin Functions > EVOLink (IX) with EThrottle Quote Link to comment Share on other sites More sharing options...
augusto Posted December 18, 2019 Author Report Share Posted December 18, 2019 The car has no Ethrottle and an Evo 9 usa. Copy the information manual page and what Aux -4 is enabled to work. Augusto. Auxiliary Outputs Aux 1 Engine Fan Engine Fan Engine Fan Aux 2 VVC Solenoid VVC Solenoid - Aux 3 Wastegate Solenoids Wastegate Solenoids Wastegate Solenoids Aux 4 FP Speed Relay FP Speed Relay FP Speed Relay Aux 5 ISC Stepper ISC Stepper ISC Stepper Aux 6 ISC Stepper ISC Stepper ISC Stepper Aux 7 ISC Stepper ISC Stepper ISC Stepper Aux 8 ISC Stepper ISC Stepper ISC Stepper Aux 11 Expansion connector Expansion connector Expansion connector Aux 12 Expansion connector Expansion connector Expansion connector Aux 13 Expansion connector Expansion connector Expansion connecto Quote Link to comment Share on other sites More sharing options...
TechDave Posted December 18, 2019 Report Share Posted December 18, 2019 http://linkecu.com/documentation/EVO9+.pdf Quote Link to comment Share on other sites More sharing options...
augusto Posted December 18, 2019 Author Report Share Posted December 18, 2019 Ok thank you Augusto. Quote Link to comment Share on other sites More sharing options...
ROB-80E Posted January 16, 2020 Report Share Posted January 16, 2020 Just jumping on board for further confirmation... Has auxiliary 12 been dropped completely from the EThrottle version? Aux12 is listed, but doesn't have a pin assignment. Thanks, Quote Link to comment Share on other sites More sharing options...
Simon Posted January 16, 2020 Report Share Posted January 16, 2020 Aux 11, through to 16 are not connected to an external connector. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.