Jump to content

Extra 0-5v inputs


neil brown

Recommended Posts

Is it possible to add in extra amplifier inputs to a g4 storm ecu 

 

on board map is only 2.5bar absolute and pushing over 1.6 bar of boost

 

left with 1 anologue input spare at present and was either going to use it for fuel pressure or egt 

 

am I stuck with what I have got 

Link to comment
Share on other sites

There are not a lot of options with the G4 as it had no CAN bus inputs.  Your best bet will be to have the internal MAP sensor upgraded to a 4Bar.  Link HQ can do it for around $130NZD last I heard or you could source it yourself and have it done by someone locally.  Part number MPX4400AP.

Link to comment
Share on other sites

4 hours ago, neil brown said:

how easy is it to change ?

You would really want someone that is reasonably confident with soldering/desoldering but apart from that it is fairly simple - just 5 pins to desolder then resolder.  

 

4 hours ago, neil brown said:

or am I better upgrading the ecu

Of course the G4+ or G4X will give you quite a bit more functionality and give you some future proofing but there will also be quite a bit more cost involved than the NZD$130 to upgrade the MAP sensor.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...