Craig Tickle Posted December 26, 2019 Report Share Posted December 26, 2019 Hi, I have a 1995 Mitsubishi FTO, which has a module labelled "Ignition Failure sensor" on the circuit diagram (see below). If I'm using a G4+ to drive the coils is there any reason I shouldn't just bypass it?, Cheers Craig Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 26, 2019 Report Share Posted December 26, 2019 Correct you dont need this and there is nothing useful the G4+ can do with the feedback signal from a circuit like this so there is no merit in having it. Quote Link to comment Share on other sites More sharing options...
Craig Tickle Posted December 28, 2019 Author Report Share Posted December 28, 2019 Cheers - Thank you Quote Link to comment Share on other sites More sharing options...
Confused Posted January 1, 2020 Report Share Posted January 1, 2020 The IFS also drives the tacho on the dash - so if you bypass it, you'll need to set up one of the outputs on the G4+ as Tacho and make sure this runs up to the gauges. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.