Sven Posted January 7, 2020 Report Share Posted January 7, 2020 Can anybody help me with pin identification on these two reluctor sensors for a 5L AU engine Quote Link to comment Share on other sites More sharing options...
Simon Posted January 7, 2020 Report Share Posted January 7, 2020 You can work out the polarity relatively easy with a volt meter. Put the leads across the sensor and then bring a steal ruler or bolt up to and then past the sensor. You are looking for a positive voltage spike as the item come towards the sensor and then negative as it moves away. If it is reversed then swap the meter leads over. The positive meter lead then indicates the trigger pin and the other is the sensor ground. Sven 1 Quote Link to comment Share on other sites More sharing options...
Sven Posted January 7, 2020 Author Report Share Posted January 7, 2020 Thanks Simon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.