joshcoop123 Posted January 8, 2020 Report Share Posted January 8, 2020 Hi I'm currently sorting out the wiring in my g1 plus into a 4agze and stuck with the CAS as there's 4 wires and in the past someone has twisted and taped the wires together but it was weird they obviously didn't know what they were doing as the knock control wiring was hooked up to it and I didn't know if it worked but I doubt it, it is a 4 wire CAS one is 24 tooth signal and two 1 tooth signals I believe but not sure where to run them Quote Link to comment Share on other sites More sharing options...
Simon Posted January 8, 2020 Report Share Posted January 8, 2020 These are the old G1 docs for the 4AGZE. The loom colours changed over time so for the ECU wiring go off location in the main header. 4AGZE.pdf joshcoop123 1 Quote Link to comment Share on other sites More sharing options...
joshcoop123 Posted January 9, 2020 Author Report Share Posted January 9, 2020 perfect thanks this makes much more sense. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.