Jump to content
Sign in to follow this  
bsh

Rover 4 cyl 18-1, 18-1 crank trigger.

Recommended Posts

Hi,

Is there a trigger mode that suits this trigger pattern? It is a Rover with a 18-1, 18-1 tooth on the cank. Trigger sees 17-gap-17-gap pr revolution. Running with no cam sensor and distributor. I started it configured as multitooth missing and 18-1 and as a 2 cyl just to get it running and check new built engine for leaks. Runs/idles very nice, but rpm are double of the actual. I have tried all 3 Rover trigger modes I could find in software, but seems all of them need a cam sync.

Thanks

Share this post


Link to post
Share on other sites

Unfortunately there is nothing existing for that. The other Rover patterns are 3 teeth missing at uneven spacing.

Maybe adding  a tooth back so it becomes 36-1?

Share this post


Link to post
Share on other sites
11 hours ago, Simon said:

Unfortunately there is nothing existing for that. The other Rover patterns are 3 teeth missing at uneven spacing.

Maybe adding  a tooth back so it becomes 36-1?

Ok. Thanks.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...