Jump to content
Michael Svoldgaard

MR2 SW20 stock map or better...

Recommended Posts

The ST205 basemap in PC Link will work, you will have to load it into your monsoon, then configure your inputs and outputs to match your wiring.

Share this post


Link to post
Share on other sites

regardless of what base map you start with, you will need to configure all I/O to match your application.

You will still need to calibrate all fuel and ignition settings for your specific engine.  

Did you set the base timing? 

Most base calibrations are solely intended to be used to get the vehicle started and onto the dyno.

Share this post


Link to post
Share on other sites
1 hour ago, Brad Burnett said:

regardless of what base map you start with, you will need to configure all I/O to match your application.

You will still need to calibrate all fuel and ignition settings for your specific engine.  

Did you set the base timing? 

Most base calibrations are solely intended to be used to get the vehicle started and onto the dyno.

Base timing reads with timing light 10 degrees on crank but the ECU are at 16 degrees, so what should be adjusted? should i set the ECU at 10 degree and adjust distributor to match the same on the crank?

This may sound stupid but it's a learning process :) 

Share this post


Link to post
Share on other sites

you need to sync the timing between the motor and the ecu to start.

Open the PCLink software.  Click on help, -> contents, -> tuning functions, -> triggers, -> Calibrate.

This will explain how to sync the timing.  

I would recommend verifying that the distributor is locked down securely and not move it afterwards.

In some small cases, it is possible to have the rotor phase angle set poorly. In this situation the spark can jump from the rotor button to the incorrect cap tower.  To rectify, it is best to set the motor to roughly 15-20 degrees BTDC and adjust distributor so that the rotor button is centered on the #1 cap tower(mark the dizzy body of #1 tower location before pulling cap to set) and lock dizzy down and resync via PCLink software.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...