Ryan Jerard Posted January 16, 2020 Report Share Posted January 16, 2020 I have a JZA80 pnp with an XS loom. I want to install another intake temp sensor pre intercooler. is this easy enough to do? If so, where do I wire to? What is the easiest way to go about this? Quote Link to comment Share on other sites More sharing options...
Simon Posted January 16, 2020 Report Share Posted January 16, 2020 You will need a free temp or AN volt channel. On side of the sensor to sensor ground and the other to the input. If using a AN volt you will also need an external pullup to 5V on the singnal Quote Link to comment Share on other sites More sharing options...
Angelo/E30M3-M50B28T-E36+ Posted January 17, 2020 Report Share Posted January 17, 2020 Hi Simon can i wire exhaust EGT's to the An volt signals or only fit to IAT ? and how is it done ? if i am using K-Type thermocouples because i ran out of Temp signals Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted January 17, 2020 Report Share Posted January 17, 2020 Will need an external egt amplifier for the EGT sensors. I would look into a canbus based unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.