Jump to content

Injector Setup


Nadeerawick

Recommended Posts

Hi Link family,

I need your support

I’m a beginner for tuning

I got a link G4 monsoon and running 2003 RSX (Base) K20 (Stock Motor) and stock injectors 270cc. I was step up injector for traditional with pump gas 98.

Now I want to run Modelled Mode. I got stuck in the Injector dead time and short pulse wide. I have found Injector dead time in HONADTA, but still I cannot find the short pulse wide

Can you help me to find this and if there is any formula please share with me?

Injector Dead Time

Injector Deadtimes                       Batt Voltage (V)

6.07      8.09     10.69     14.06    16.08

4.72     2.38        1.3         0.84      0.66

 

Injector Flow @ Rated Pressure?

Injector short Pulse wide?

Base Fuel Pressure?

Link to comment
Share on other sites

I havent double checked those values for you , but if you copied those values from a hondata base map they are probably pretty accurate. I've done the same thing myself a few times and things have worked well. Just make sure it was a hondata tune with 270's and not 310's or whatever the newer ones were. Also, the voltage breakpoints in the hondata tunes are different than link default so you have to adjust your axes in the link config or play with excel a bit

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...