Jump to content
ThatSupraGuy

Boost solenoid to supra link

Recommended Posts

Hi all just wondering how to wire in a boost solenoid to a supra link pnp?

Can it be wired in using an expansion loom?

I'm doing 2jz na-t so there is no factory boost control.

Thanks 

Share this post


Link to post
Share on other sites
8 hours ago, ThatSupraGuy said:

Can it be wired in using an expansion loom?

Unfortunately there are no spare aux outputs on the expansion connector (well only aux 9 but this can only be used for E-throttle).

Easiest option would be aux 4 which is pin B60.  So connect one of your solenoid wires to B60 and the other wire needs to go to a 12V supply that is only live when the ign switch is on.

Share this post


Link to post
Share on other sites

SupraLink was designed around US/EU spec twin turbo. You will find that on an NA supra loom there is no pin on B60 from factory. So what you will have to do is depin another pin from somewhere else on the harness, put that into B60, then proceed to do your wiring to do the boost solenoid. 

Share this post


Link to post
Share on other sites

So I could potentially use the pin from the factory o2 sensor as I have a wide band wired in with an expansion loom and just re pin to B60?

Thanks alot for your help, really appreciate it.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...