Jump to content
Eacs10

Help with fault codes!

Recommended Posts

Needing some help with these fault codes. I just switched over from a stock Evo 9 computer to the LinkG4 and so this how far I've gotten. I'm trying to start it for the first time(also has Kiggly 12 tooth crank trigger.) Any help or pointing to the right direction would be great. Thank you! 

 

I'm not sure if these fault codes are stopping it from turning on but it a start for me. 

 

IMG_20200209_095604.jpg

Share this post


Link to post
Share on other sites

Assuming you are on the base map and wiring is stock neither of those will be an issue when it comes to starting.

You will however have to change the trigger settings to suit the Kiggly 12 tooth crank trigger. The cam wheel for trig 2 will also need a tooth removed.

Trigger Mode will need to be changed to Multi tooth.

And settings for trig 1 set to the 12 tooth crank and trig 2 to CAM x1

Share this post


Link to post
Share on other sites

Yes, the basemap is set, I am on stock wiring, cam wheel tooth has been removed. I believe you sent me the values for it last time. 

Screenshot_20200208-172028~2.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...