Jump to content
Sign in to follow this  
bsh

LS 24x trigger with no cam sync?

Recommended Posts

As most aftermarket ecu's only look at the falling edge, which gives no position reference...I doubt it. Although if they could set the ecu to read the rising edge which does have a variety of tooth gaps, it could be possible.

 

Why not just add/use the cam trigger ?

Share this post


Link to post
Share on other sites
On 2/10/2020 at 12:18 AM, Stevieturbo said:

As most aftermarket ecu's only look at the falling edge, which gives no position reference...I doubt it. Although if they could set the ecu to read the rising edge which does have a variety of tooth gaps, it could be possible.

 

Why not just add/use the cam trigger ?

I will run wasted spark and dont want to wire a cam sync if I dont have to since I will be using the Atom with 4 outputs..

On 2/10/2020 at 1:43 AM, Simon said:

That one needs the CAM sync.

Ok thanks:)

Share this post


Link to post
Share on other sites
On 2/12/2020 at 12:06 AM, Stevieturbo said:

Or else just stick a 36-1 onto the crank pulley and use it instead ?

I will just wire in the sync:) Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...