Jump to content
Cefiro

1uzfe non vvti startfile/basetune help

Recommended Posts

Can anyone point me on the right direction for a start file/base tune for a non vvti 1uz, running a monsoon g4x with a coil on plug conversion using the standard 12-1 trigger

 

Share this post


Link to post
Share on other sites

There is a 1UZ base map in the G4X software.  It is from an atom but it will be converted to monsoon when you load it into your ecu.  Just change the ignition mode from twin distributor to wasted spark.

Share this post


Link to post
Share on other sites
3 hours ago, Cefiro said:

Is that base map for the vvti or non vvti 1uz

Its a non VVT setup. Trigger mode will need to be changed as you have a 12-1. Mode will need to be multi tooth missing. 

Share this post


Link to post
Share on other sites
22 hours ago, Cefiro said:

coil on plug conversion using the standard 12-1 trigger

 

10 hours ago, Cefiro said:

I’m also not running the original cam sensor 

I think you have caused some confusion judging from Simons reply.

Note the non VVT 1UZ is not 12-1 in stock form, it is just 12 evenly spaced teeth on the crank.  The G4X base map that I suggested you use is already setup correctly for this.

With a 12 evenly spaced tooth crank wheel you will need the cam sensor, there is no way it can work without it.

 

If you have modified the stock wheel to 12-1 then it will be ok without a cam sensor but you will need to change the trigger setup in the base map as suggested by Simon.

Share this post


Link to post
Share on other sites

i Think I did add some confusion by mistakingly saying I’m running a 12-1 trigger, I’m running the standard 12 tooth wheel with all equality spaced teeth, I have contemplated getting a 36-1 trigger wheel from the vvti 1uz but If there was a way to modify my standard 12 tooth wheel for the time being I would go for that option 

Share this post


Link to post
Share on other sites

To use the stock wheel without a cam sensor the option would be to remove 1 tooth to make it a 12-1 wheel 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...