Jump to content

PC Logging


Dom

Recommended Posts

Hi Guys!

I am new to the forum, my name is Dominik, and I am from Austria.
I´m running a G4+ Thunder, but I have troubles setting up the PC Logging function correctly. I want to have a time plot, but there is no logged parameter. When I navigate to Logging Setup, and pull some parameters to the logged parameter list, nothing changes.
The ECU still does not provide data because there are no logged parameters, even after a power cycle.
But pulling any parameter into a dial gauge works well.

What do I overlook here?

Thanks for helping!

BR,
Dom

Link to comment
Share on other sites

Of course. It had some parameters that could be logged.
I just wanted another parameter logged, and it stated "no data". I went into the logged parameters list and checkt vor the parameter I wanted to log.
I tried to erase all parameters out of the list. No change in selectable parameters for the time plot.
We made a firmaware update to the latest firmware and latest PC Link software.
After that, the ECU had no parameters that could be logged in a time plot (same as the logged parameter list stated).

This is the current state. No matter what I do to the logged parameters list, the ECU states "no data" to every parameter that could be logged before.

BR,
Dom

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...