Alex182 Posted February 17, 2020 Report Share Posted February 17, 2020 Hi, I'm currently facing an issue with the aux output set to tacho on a vipec i88 in a subaru STI (ej20). Whenever I set it to tacho it works flawlessly until I turn off the ignition off and back on. Aux is still set to tacho but no rpm signal. I always need to set it so another output and back to tacho to work again. Is it a bug or do I miss sth.? Thanks in advance! Subaru WRX V8 Vi-PEC_i88_LINK IAT-Link3Port_3ZollAGA_ECUTEK-800cc_GarrettGT2860_PfitznerSEQGB_COBB_SF_Intake-ETS_LLK_v6.pclr Quote Link to comment Share on other sites More sharing options...
Simon Posted February 18, 2020 Report Share Posted February 18, 2020 You have two aux outputs assigned as Tacho. You have the one on Aux 4 which would be correct for your application. But you also have one set on Aux Ign 5 If you set Aux Ign 5 to off and store all should be good. Alex182 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.