Dochka Posted February 19, 2020 Report Share Posted February 19, 2020 Hi, I'm in the process of starting a Golf ABF Engine, I've got a Trigger 1 Signal but No RPM Anyone can help with the trigger calibration ? Offset Hovoss Seat.pclr Hovoss Trigger Scope Log 2020-02-19 7;34;15 pm.llg Quote Link to comment Share on other sites More sharing options...
Simon Posted February 19, 2020 Report Share Posted February 19, 2020 Your trigger scope indicates you have a VR sensor on the crank. Change the Trig 1 to Reluctor sensor. Currently on trig2 you just have noise. Is there a sensor wired? Quote Link to comment Share on other sites More sharing options...
Dochka Posted February 19, 2020 Author Report Share Posted February 19, 2020 Thank You for the help, Problem solved It was the battery, a voltage drop to 7V on Cranking Changed the battery and issue solved ! Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 20, 2020 Report Share Posted February 20, 2020 You still need to fix the problems that Simon mentioned. With your trigger 1 settings wrong you are going to have significant timing drift and possibly trigger errors. If you have no cam sensor connected you should set trigger 2 sync mode to "none". Quote Link to comment Share on other sites More sharing options...
Dochka Posted February 21, 2020 Author Report Share Posted February 21, 2020 On 2/20/2020 at 9:14 AM, Adamw said: You still need to fix the problems that Simon mentioned. With your trigger 1 settings wrong you are going to have significant timing drift and possibly trigger errors. If you have no cam sensor connected you should set trigger 2 sync mode to "none". Thank You ! I changed the Trigger 1 Settings to Reluctor and for now set the Trigger 2 to "none" Everything works great Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.