Jump to content
Mustang

G4x Trigger Modes

Recommended Posts

G4x Atom ECU, have to use a Distributor with Hall Sensor but can´t find the Trigger Mode "1 tooth per TDC".
Is Distributor Trigger not possible with the G4x ECU or which Trigger Mode can i use?

Marc

Share this post


Link to post
Share on other sites

Simon,
Install the ATOM G4x tomorrow.
Distributor contains the Hall Sensor.
I set Trigger 1 mode to multi tooth and trig 2 sync mode to none.
The Trigger Calibration Table for 1 Tooth Per TDC Trigger Mode to set the base timing is not available.
How do i set the base timing? Lock Timing to 10° BTDC , rotate Distributor until it matches 10° BTDC and set the offset to 0?

Share this post


Link to post
Share on other sites

Simon,

sorry for my bad explanation / english.
I know how to open Set Base Timing.
Just want to know what i have to write in the Offset Field since the procedure to calalibrate the Distributor Trigger is not the same as in the G4 + Ecu.

How do i set the base timing? Lock Timing to 10° BTDC , rotate Distributor until it matches 10° BTDC and set the offset to 0 or ....?

1286712318_SetBaseTiming.jpg.cd51d2d35ae95cc7f60e127eb84f1658.jpg

Share this post


Link to post
Share on other sites

In the old G4+ "1 tooth/TDC" mode the offset was locked to zero.  So I would do as you suggest - start with offset at zero and set timing by rotating the distributor.  This would usually result in your rotor phasing being correct assuming it is an unmodified OEM distributor.

 

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...