Jump to content
DriftKr6l

G4 evo plug and play and AIM MXS display

Recommended Posts

Since the AIM MXS display uses CAN and I believe the G4 does not, is there still a way to hook up the display?

The G4 is a Evo9 plug and play.

 

Thanks for the help

 

Share this post


Link to post
Share on other sites

The G4 is able to support basic CAN. (have to run fixed can streams) 

Early units need hardware changes to enable it (pre 10000 serial) 

But it will be fine for coms to the AIM.

 

Share this post


Link to post
Share on other sites

Assuming your G4 serial number is >10000, then the easiest option is to get a CANPCB cable and a CANF plug from a link dealer.  Connection is then like so:

 

3srpmGI.png

Share this post


Link to post
Share on other sites

Thanks Adam, appreciate the help.

Ill look at the serial number, if its 10000< then what?

Would this expansion loom do the job and give me all the pinouts I need ?

9sZymQs.png

Or is this the correct connector so I can make my own?

https://otakugarage.com.au/product/canbus-connector-kit-for-link-g4-plugin-ecu/

FG7rO9U.jpg

It would suck to have to buy two expensive cables just to get two wires out.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...