JohnGee Posted February 26, 2020 Report Share Posted February 26, 2020 Hi Adam Ive finally had time to try this setup on my Vipec and have a few questions: the buttons on my steering wheel are connected and signals working on the run time values page. At the moment its not working 100% due to the PC settings I assume. My questions are; does it matter that Im using Di2 for trans brake and Di4 for the bump box, I have attached a page photo of the settings done so far and need these checked please Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 27, 2020 Report Share Posted February 27, 2020 I see a few things wrong there, can you attach your actual tune file. Quote Link to comment Share on other sites More sharing options...
JohnGee Posted February 27, 2020 Author Report Share Posted February 27, 2020 File attached I hope it is readable :) V88 V6 File27Feb.pcl Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 28, 2020 Report Share Posted February 28, 2020 Try this, should be closer. V88V6File27Feb Bump fixed.pcl Quote Link to comment Share on other sites More sharing options...
JohnGee Posted March 1, 2020 Author Report Share Posted March 1, 2020 Thank you Adam I will try this out shortly and let you know. Quote Link to comment Share on other sites More sharing options...
JohnGee Posted March 2, 2020 Author Report Share Posted March 2, 2020 Thanks again Adam It seems to be working with both buttons clicking the transB solenoid, I'll be trying it out on the track this weekend, if I need to make some adjustments where do I find the page with the info? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 2, 2020 Report Share Posted March 2, 2020 My hunch is the timer 1 will probably need to be more like 0.1s and the PWM will need to be more like 25% for a decent bump but the examples above are probably a nice conservative place to start. Quote Link to comment Share on other sites More sharing options...
JohnGee Posted March 4, 2020 Author Report Share Posted March 4, 2020 Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.