Bomber Posted March 22, 2020 Report Share Posted March 22, 2020 Got a bit of a weird issue with a Fuel Pressure figure in an Ecumaster ADU5. The sensor is a Link PS150 and uses the Cal4 table in the Link Fury - the ADU receives all it's data via CAN using the Ecumaster default 'LinkECU_GenericDash.canx' file. When the ECU sees 50psi - the ADU reports 0.49psi. I can see that I can edit the Multiplier and Divider for the Canbus input 'ecu.fuelPress' - but I cannot edit the decimal places - which it seems is all I need to do. I have zero experience with any of this - so treat me like an idiot. Thoughts? Cheers! Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 23, 2020 Report Share Posted March 23, 2020 In the ADU CAN template, what is the multipler and divider currently set to? It should be 1 and 1 but I have noticed last time I used one some of their scaling or units are messed up in the background. If 1 & 1 doesnt work try a divider of 1 and multiplier of 10. Quote Link to comment Share on other sites More sharing options...
Bomber Posted March 23, 2020 Author Report Share Posted March 23, 2020 Think you've nailed the culprit - its set to Multiplier 1 and divider of 10, so it's dividing everything by 10 at the moment, which is exactly what I"m getting. I'll report back when I've had my morning pint of coffee. Cheers! Quote Link to comment Share on other sites More sharing options...
Bomber Posted March 27, 2020 Author Report Share Posted March 27, 2020 Changing the divider from 10 to 1 sorted the issue and it now reads the same as the Fury - many thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.