S116ukr Posted April 13, 2020 Report Share Posted April 13, 2020 Hi ive had a quick scout around on the forums to try and find the answers to these questions dont seem to have any luck... Firstly i didnt know if it was at all possible to show the readings from my analogue inputs from my g4+monsoon on the aim dash and if so how to. For example i have a plx wideband wired into the ecu through one of the inputs. Secondly ive wired in the required resistor for my fuel sender etc to read on the dash, i appear to have it reading somewhat correctly in that it is showing -23 litres on my dash however im a little confused as to why its showing the - minus signal before the actual litre reading, any ideas? Quote Link to comment Share on other sites More sharing options...
S116ukr Posted April 13, 2020 Author Report Share Posted April 13, 2020 ignore the analogue inputs from the ecu i was being retarded , Just the fuel issue that im having now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.