Swampy433 Posted April 13, 2020 Report Share Posted April 13, 2020 I've installed my Supralink G4+ in the car, powered it up, installed the Supra base map. Spec - 880CC injectors, 264 cams, Link knock sensors, stock MAP currently but will be fitting an AEM 5 bar sensor. Problem is it turns over, tries to catch then floods, it has run briefly but was very rich. I just need to know what to adjust to achieve a start, fuel trim etc. Cheers Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 13, 2020 Report Share Posted April 13, 2020 if fuel equation is set to traditional, adjust the master trim in the fuel tab... if it is set to modeled, adjust the fuel scale value. This will globally adjust the fueling with out having to mess with the fuel table. Quote Link to comment Share on other sites More sharing options...
Swampy433 Posted April 14, 2020 Author Report Share Posted April 14, 2020 It's ok, sorted it now. Turned starting enrichment down and lowered the master fuel trim, starts on the button now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.