Jacky Fung Posted April 16, 2020 Report Share Posted April 16, 2020 Dear All, I have a question about setting and pinout of a extra speed sensor for Cosworth Escort There are three cable, as I understand as other sensor. Voltage Input / Ground / Signal. For voltage input. I found it is 12V, but some told 5V, some told 12V. or 5V / 12V either? For the signal, i need to put in Digital Input (DI), am I right? and what is the setting of it? Attached w/ the sensor that I installed. Thanks for your kindly help!! Jacky Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 16, 2020 Report Share Posted April 16, 2020 Is this for wheel speed or crank position? picture shows crankshaft speed and use of 12v, obviously. I only ask as i find myself re-purposing sensors for non intended tasks a lot. From experience GM reference sensors work on 12v, Cherry sensors are 12v, Hyundai sensors are 12v, but many will work with regulated 8v. Basically need to reference the documentation for the specific sensor which you have posted here. Quote Link to comment Share on other sites More sharing options...
Jacky Fung Posted April 16, 2020 Author Report Share Posted April 16, 2020 Thx Brad, Since the picture provided by client. I did install on top of the original speed sensor to provide speed signal to Link ECU. But this pic is the only thing he know.... so I post here and hope someone can figure out the spec. Let me ask for more details from him. Thanks for your kindly help! Jacky Quote Link to comment Share on other sites More sharing options...
Jacky Fung Posted April 18, 2020 Author Report Share Posted April 18, 2020 Status Update. Finally I connect a 5V signal and ground to sensor. Then put the signal to DI 2 And the ECU got speed signal correctly! Thanks for supporting. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.