JohnRambo Posted April 20, 2020 Report Share Posted April 20, 2020 I think this GTSLink G4 PnP I have is broken. It keeps the car on when you turn the key off. Initially you could start the car and it would idle but was low rpm, now it just won't fire the car. I saw on a recent FB post David had and said to check cont between pins 4 and 58 which I get nothing and to check this below. So I suspect it has be toasted. Photo attached of what David said to look at when opening it. Can it be repaired? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 20, 2020 Report Share Posted April 20, 2020 Yes it should be repairable. Contact [email protected] to arrange. The component that is fried there is the flyback diode for the idle valve, so that may explain the low idle but I dont think it could cause it to stay on. It may suggest there is a problem with the wiring somewhere. I will let tech support advise on that once they have inspected what is damaged. Quote Link to comment Share on other sites More sharing options...
JohnRambo Posted April 20, 2020 Author Report Share Posted April 20, 2020 Thanks. Really appreciate the response. Car has sat for 2 years and I've decided to pull it out. I think I still have a stock ecu around that should plug it and fire up to test everything else in the car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.