Jump to content

2JZ sequential staged


Hamuod

Recommended Posts

Hello there

 I have 2jz drag supra will be running 12 injectors all siemens deka 2400cc  Low Impedance  on my link g4+ fury  im running  high octane  q16 vp fuel  with 200 shot nitrous

i would like to know how to wire the staged injectors in to groups for each cylinder since im using  

Inj 7 = Sec Group 1 and  Inj 8 = Sec Group 2

is this order the right way to wire it?

Inj 7 = Sec Group 1= sic1 sic2 sic3

Inj 8 = Sec Group 2= sic4 sic5 sic6

can you please check if my settings are correct for the staged injector setup

secPW lockout=  0.60ms  ???

since im using the same injector's would you recommend to use 50%  in Sec Injection Staging Table

 

IMG_20200508_220927.jpg

Link to comment
Share on other sites

You proposed inj wiring would be correct.  Having 3 low impedance injectors connected to a single drive is a bit boarder line but give it a try.  Set peak to 10A and hold to 3A.

I suggest for staging mode you use Sec/Pri flow ratio, set the Sec/Pri flow ratio to 1.0, and you want 50% as the largest number in your staging table.  For Sec PW lockout I would suggest something more like 1ms to make sure you are working in the Injectors linear region.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...