Fintorious Posted May 12, 2020 Report Share Posted May 12, 2020 Hi guys, I have a 1997 Nissan Micra/March ive recently purchased a link atom ecu . The company I have bought it from state that there is no base map for a Nissan micra and link ecu have confirmed this . my engine spec is : cg13de 1.3 272 degrees high lift cams 4-2-1 2 inch exhaust cbr1000r itbs 90mm trumpets cbr injectors cbr TPS polish and ported head polished pistons balanced bottom end 36-1 trigger wheel with cosworth vr sensor link air temp sensor walbro 255lph fuel pump d1 adjustable fuel reg 3kg flywheel lightweight crank pulley what’s my best option as the guy I want to map the car is 200kms away. I want to be able to start the car and check wiring and fluid leaks etc before putting it on a dyno . is it possible to write up my own base map or is there someone that specialises in making base maps thanks in advance Quote Link to comment Share on other sites More sharing options...
bsh Posted May 12, 2020 Report Share Posted May 12, 2020 Hi, you can make your own base map, but I would speak to your dealer/tuner to help you out. He can help you ie via Team Viewer to setup and see everything working, setup trigger offset (you must connect a timing light to cyl 1 and communicate with the tuner regarding timing offset) etc... Should be able to do it yourself also, but you must read and understand the excellent help manual in PCLink software and do it yourself. Quote Link to comment Share on other sites More sharing options...
Fintorious Posted May 12, 2020 Author Report Share Posted May 12, 2020 2 hours ago, bsh said: Hi, you can make your own base map, but I would speak to your dealer/tuner to help you out. He can help you ie via Team Viewer to setup and see everything working, setup trigger offset (you must connect a timing light to cyl 1 and communicate with the tuner regarding timing offset) etc... Should be able to do it yourself also, but you must read and understand the excellent help manual in PCLink software and do it yourself. I have a timing light here . Do I need to know cc of injectors or anything or programme codes of them ? Also when my link arrives am I able to plug it into my pc and view the map on the ecu and be able to make base map or do I need specific software to do so ? Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted May 13, 2020 Report Share Posted May 13, 2020 You will need to have the PC link software installed. If you have all the data for the injectors then there are tables for dead time and short pulse width that can be filled in. Best start is to get the PC software installed and start working through the help file. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.