Simon Kribstock Posted May 12, 2020 Report Share Posted May 12, 2020 99 STi plug-in g4+. Setting up my launch control. Would like to use, or at least try, my clutch switch as the activation control. I believe DI5 was the default input but I'm not 100% sure. It doesn't respond in the runtime window so it obviously won't arm. I know the switch works because I originally had it bypassed for no-clutch starts and now it won't start unless depressing the clutch. Any ideas? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 13, 2020 Report Share Posted May 13, 2020 Do you see the DI5 runtime change status when you press the clutch? Can you attach your tune. Quote Link to comment Share on other sites More sharing options...
Simon Kribstock Posted May 13, 2020 Author Report Share Posted May 13, 2020 no, it doesn't change. tune attached 4bar MAP, quick spool, popping flames flat boost.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 13, 2020 Report Share Posted May 13, 2020 Its not clear what you mean by "default input". In the stock car the clutch switch is not even connected to the ecu, DI 5 is on the expansion harness, have you actually wired the switch to the ecu? Quote Link to comment Share on other sites More sharing options...
Simon Kribstock Posted May 13, 2020 Author Report Share Posted May 13, 2020 Haha ok that is what I should’ve asked; if the clutch even sends a signal to the ECU on a standard Subaru. I was thinking it was a pre-wired input like the power steering switch, ac request, etc. I must’ve entered it with the intention of wiring it to DI5. Thanks Adam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.