Turnem Posted May 26, 2020 Report Share Posted May 26, 2020 Hi All, I’m running a Delco air temp sensor that has 3457 ohms at 20 degrees c. Does anyone know if the pre configured setting labeled: Delphi AC IAT is the same? Also, I don’t have figures for my short pulse width adder table, is this a big deal? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted May 26, 2020 Report Share Posted May 26, 2020 Sensor calibrations can be found under the Technical Terms and Reference part of the help manual. It is typical to leave the short pulse width adder table all 0s if you don't have that specific data for your injectors, if you do add values in later after tuning you may need to correct your fueling a little. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.