billy cravings Posted May 29, 2020 Report Share Posted May 29, 2020 i have a set of 14Ω Injectors, and i have ordered a plug in link g4+ and the manual says. "The G4+ VLLink Plug-In ECU has been designed to run directly with factory fitted 3Ω low impedance injectors. This means that ballast resistors are not required when installing this G4+ Plug-In ECU. Peak and Hold injection is used to control the factory injectors. When upgrading injectors, it is important to select injectors of correct impedance (2Ω to 3Ω). Please contact your nearest Link dealer directly for more information." do i need to get low impedance Injectors? or can i change the setting in the link g4+ plugin ecu rb30 ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 29, 2020 Report Share Posted May 29, 2020 The special drivers on the VL plug-in run high imp injectors no drama with no changes to settings required or even possible. billy cravings 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.