lostsoul Posted June 6, 2020 Report Share Posted June 6, 2020 Ok, since mucking around getting my speedo to work correctly the engine won't shut down. Obviously I have done something, where should I start looking? Cheers Quote Link to comment Share on other sites More sharing options...
Monsterbishi Posted June 6, 2020 Report Share Posted June 6, 2020 Have you made any physical changes, or just software configuration? Quote Link to comment Share on other sites More sharing options...
lostsoul Posted June 6, 2020 Author Report Share Posted June 6, 2020 Connected the Speedo input wire to aux2. Quote Link to comment Share on other sites More sharing options...
Monsterbishi Posted June 6, 2020 Report Share Posted June 6, 2020 Sounds like it's backfeeding through the Aux?, perhaps add a relay into the equation? Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 6, 2020 Report Share Posted June 6, 2020 The first thing to do would be disconnect that aux to see if the problem goes away. Quote Link to comment Share on other sites More sharing options...
lostsoul Posted June 7, 2020 Author Report Share Posted June 7, 2020 OK, it was also giving a power supply error message 73 and 99 and a .25volt system volts .... checked all connections, fuses and the pins going into ECU plugs. Also checked the PC Link software settings against a previous version (modification wise)... all base settings were the same .... still getting errors and not shutting down. So, loaded the previous version that I checked against ... no problems at all !!!!!! ..... is it possible that for what ever reason the problem version had got corrupted some how ? Anyway it's all working as it should now. Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 7, 2020 Report Share Posted June 7, 2020 1 hour ago, lostsoul said: So, loaded the previous version that I checked against ... no problems at all !!!!!! ..... is it possible that for what ever reason the problem version had got corrupted some how ? Unlikely, especially the main point that you said it is not turning off - that usually means there is a lost power supply so the flyback from injectors etc keeps it alive. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.